Passenger Handle

13958282_691624987635857_3877486276636347725_o.jpg
Load testing the handle!
Load testing the handle with cinder blocks!
13958282_691624987635857_3877486276636347725_o.jpg
Load testing the handle!
Load testing the handle with cinder blocks!

Passenger Handle

from 125.00

Tired of telling your Passenger to not use the door handle every time when they tried to close the door? Or cringing every time you hear the door shut in fear it will shatter into a million pieces?? Well we've got you covered! We have redesign the Passenger door handle with improvements all around!the stock lid lacks!

The issues we found and the improvements we've made:

Material- All of the OEM interior plastic Mazda uses are prone to cracking and disintegrating due to the heat making them brittle. Our solution- using a resin with the Heat Deflection temps of 230*+.

Tab- The extrude tab on the bottom of the handle (that connects to the metal bracket attaching the handle to the door) is prone to breaking. We've addressed this issue by making the tab thicker and re-enforcing it's base.

Neck- This is the thinnest part of the handle. Although its uncommon for the handle to break as this point, we didn't want to increase the strength of all the failure points and have this become the new breaking point. So we thickened this as well!

Strength- To ensure these last longer than the brittle stock plastics we have increased the thickness everywhere possible and fillet all the joints.

Ease of installation- This is a direct casting off the OEM Handle with added material. This is a direct replacement and fit as the OEM Handle!

DISCLAIMER: Bare Handle will require you to reuse the stock upholster or make your own. Our black leather upholstery may vary as each cow hide is unique and each dying process may vary from each batch

LHD Only- 94 textured finish (not visible as its on the backside of the handle)

Finish:
Quantity:
Add To Cart