PRODUCT DESCRIPTION:

You never know when your motor is going to spit out an apex seal so be prepared! Always have a spare apex seal with you at all times! This is a passion product I’ve had for almost 10 years. I could never source an off the shelf housing for the apex seal which had this idea canned for so many years. Thankfully with the advancement of 3D printers in the consumer market, along with acquiring a laser cutter I was finally able to make it happen. These 1pc apex seals are laser cut out of 2mm stainless steel. The Acrylic window is laser cut, engraved, then painted (text). The housings are 3D printed and paused about 90% of the way through. The apex seal is then inserted and then the print is resumed fully encapsulating the apex seal. The only way to get the apex seal out is by actually breaking the glass/housing! DISCLAIMER: This is NOT a real apex seal, do NOT use it in your motor!!!

Features:
2MM Stainless steel 1pc Apex seal encased in a 3D printed housing with acrylic window
D-Snap Hook

Specifications:
Material: PLA, Stainless Steel/Steel and Acrylic
Finish: Brushed SS, Red PLA

Includes:
In Case Of Emergency Key Chain

DISCLAIMER (READ BEFORE PLACING AN ORDER):
This is a NOVELTY item, do NOT use the “apex seal” in your motor.