PRODUCT DESCRIPTION:

Our Passenger dash knee trim reproductions are a NLA (No Longer Available) part from Mazda. We reinforced the trim with a filleted rib cage adding more rigidity to the panel. We also reinforce the mounting tabs to prevent any premature failure. Please note there is a difference in 93/94 Model cars. The 94 Models gained an Passenger airbag which caused a redesign glove box, which alters the Dash side trim and changes the mounting points. These are not interchangeable and specific to year.

Features:
Direct replacement - Absolutely no modification required
100% True texture match, grain for grain - Not a simulated “Texture” using paints

Specifications:
Higher Quality Material- Urethane resin with the Heat Deflection temps over 230* (Stock plastic trim becomes brittle due to heat)
Material: Urethane Resin
Finish: SEM Landau black paint

Includes:
Dash Side Trim (LHD Passenger Side)
(2) Retaining clips re-installed (Part# H260-64-343)
(1) Push Type Fastener (Part# B467-68-AC3)

DISCLAIMER (READ BEFORE PLACING AN ORDER):
Due to the nature of the process we are using (Silicone Molds and Resin Casting) we are able to pick up every exact detail. We modify OEM cores which allows us to get a 100% identical texture match to the original part. However, if there is a cosmetic blemish, it will appear on our remanufactured part as well. With these cars being over 25 years old it is becoming impossible to get cosmetically immaculate parts to use as cores, especially since most of our products are remanufactures NLA (No Longer Available). We want to be 100% transparent with our customers so we are noting any cosmetic blemishes that have transferred over to our parts here. ALL parts function just like OEM if not better, these minute blemishes are strictly cosmetic on textured areas that we can not repair without messing up the texture. Please look carefully in the photo’s, most issues are only seen at certain angles and are not easily visible unless you are trying to find them.

Known Cosmetic Blemishes:
Slight scratch about an inch to the left of the mounting hole. Only about 1/4” of the scratch can be detected and is only visible if you are looking from the right side at an angle of 60* or less. However, the blemish disappears looking from left to right which is the most common angle this will be viewed from (Passengers view looking forward). The blemish can be seen in the 3rd picture.